Description
The YRC1000 can safely stop the system using the watchdog function even when an error occurs. This alarm occurs when the watchdog function of the ACP02#8 board detects an error.
Subcode description
A watchdog timeout was detected on the ACP02#8 board.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the optional board settings in maintenance mode. |
| ACP02 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the following boards. Save CMOS.BIN before replacing the board. • ACP02 board |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |