[Cause]
PowerWaveErrorCode No.11 occurred. A message was sent to another machine in the system over the digital communication line (Arclink), but no response was received. This error occurs when a machine in the system is powered off or disconnected.
[Countermeasure]
Check that every machine in the system is powered correctly. Check that the machines in the system communicate correctly. If the problem persists, before performing any other operations (power-off or jogging) after this alarm occurs, use the abnormal-state recording function ("Abnormal State Record" in the auxiliary menu) to obtain an image backup and contact the service center. If that function cannot be used, record the conditions and operating steps up to the alarm, obtain an image backup, and contact the service center.