Description
The feedback pulse count of the axis executing endless rotation exceeded the maximum allowable pulse count (±536870912).
Subcode description
Sub Code: Signifies the axis in
which the alarm occurred
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following items. • Job settings • MRESET instruction for the corresponding axis |
| SDCA01 board (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the SDCA01 board. As a precaution, save CMOS.BIN before replacing the board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |