Description
An error occurred when the Ethernet function was used.
Subcode description
An error occurred in the
acquisition process of SNTP
server during the network
service data creation process of
the Ethernet function.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Operation of the DHCP server (when DHCP is used) • Network status (when DHCP is used) |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |