Description
An error was detected by the diagnostic function for the feedback signal from the brake output.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| ASF01 board (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the ASF01 board. For a system with multiple ASF01 boards connected, replace the ASF01 board connected to the signal that generated the alarm. |
| SDCA01 board (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the SDCA01 board. For a system with multiple SDCA01 boards connected, replace the SDCA01 board that generated the alarm. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |