Description
An error occurred when executing a SETTOOL instruction. The difference between the current tool constant and a new set value exceeded the allowable range (parameter set value).
Subcode description
An error occurred when executing SETTOOL. The difference between the current tool constant and the newly set value exceeds the allowable value (parameter setting).
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Modify the job so that the tag setting is within the allowable values. • Increase the maximum allowable offset (S3C1192) setting for the automatic tool data setting function. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |