Description
An error occurred at SVON instruction execution.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Cable (abnormal) | 1. Reset the alarm. 2. Check whether external servo ON (EXSVON) is short-circuited. |
| Software (incorrect setting) | 1. Reset the alarm. 2. Check the following settings. • Concurrent I/O signal 80031 (servo ON condition 1) ON • Concurrent I/O signal 80033 (servo ON condition 2) ON |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |