Description
An error occurred at PSTRIG instruction execution.
Subcode description
When PSTRIG instruction was
executed, P-PLC instruction had
not been executed.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. Reset the alarm. 2. Check whether the P-PLC instruction has been registered. If not registered, register the P-PLC instruction. 3. When executing the PSTRIG instruction, check whether the P-PLC instruction has been executed. If not yet executed, execute the P-PLC instruction before executing the PSTRIG instruction. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |