Description
This alarm occurs if abnormal internal data is detected during the access to the job data of operating/editing software.
Subcode description
The number of steps added to a
job exceeded 9999.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Number of steps in the job: Delete unnecessary steps from the job, then add the step again. |
| Software (malfunction) | 1. Reset the alarm. 2. If this happens again, delete the job where the alarm occurred. 3. If the alarm recurs despite the above measures, initialize the job in maintenance mode and reload the saved job. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |