[Cause]
The action in the learning instruction has changed. M represents the number of the learning data, %s represents the program name, and P represents the reason for the change in the action. in This alarm will occur when the action statement immediately before LVC_END or APC_END is deleted during learning, or the number of blocks in the standby instruction changes. Regarding P, please refer to the table below.
+---+-----------------------------------------------------------------------+ | P | Reason | +---+-----------------------------------------------------------------------+ | 1 | Action statements immediately before LVC_END or APC_END are deleted | +---+-----------------------------------------------------------------------+ | 2 | The conditions for establishing the standby instruction have changed. | +---+-----------------------------------------------------------------------+
[Countermeasure]
1. Restore the factors that caused the motion change to their state before the motion changed.
2. Delete the learning data on the Data screen and repeat learning from the beginning.
STOP.G APC: The action has changed (M%d, %s,P %d)
[Cause]
The action in the learning instruction has changed. M represents the number of the learning data, %s represents the program name, and P represents the reason for the change in the action. in This alarm will occur when the action statement immediately before LVC_END or APC_END is deleted during learning, or the number of blocks in the standby instruction changes. Regarding P, please refer to the table below.
+---+-----------------------------------------------------------------------+ | P | Reason | +---+-----------------------------------------------------------------------+ | 1 | Action statements immediately before LVC_END or APC_END are deleted | +---+-----------------------------------------------------------------------+ | 2 | The conditions for establishing the standby instruction have changed. | +---+-----------------------------------------------------------------------+
[Countermeasure]
1. Restore the factors that caused the motion change to their state before the motion changed.
2. Delete the learning data on the Data screen and repeat learning from the beginning.