Description
Anybus Configuration mismatch between adapter and connection PROFINET controller in slot arg.
Consequences
The Anybus adapter will display a diagnostic error and communication will not be possible between the Anybus adapter and the attached PROFINET controller.
Possible causes
PROFINET Data type/size mismatch in controller configuration slot arg. Expected data type/size is arg arg bytes.
Recommended actions
Correct the data type/size in slot arg in the external configuration tool, or change the data size in the I/O configuration.
Note:
In the PROFINET controller configuration, the input data should be in slot 1 and the output data should be in slot 2.