[Cause]
In a system with the multiple-equipment function, this alarm occurs when the equipment count is increased from 1 to 2 while equipment 1 is set to ROBOWELD. No countermeasure is required in this case. In other cases, inconsistent ROBOWELD settings may cause unexpected values to appear on the welding equipment screen and welding condition screen.
[Countermeasure]
Perform a controlled start, temporarily select a welding power source other than ROBOWELD on the welding power source selection screen, and perform a cold start. Then perform another controlled start, select ROBOWELD again, perform a cold start, and configure all setting values again.