Description
The parameter setting do not match to system configuration setting.
Subcode description
Parameter setting does not match
the number of ASF01 boards.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Start maintenance mode, display the control group setting screen, and check that the settings match the system configuration. |
| ASF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ASF01 board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |